Home/Cities/British Columbia/Mission
Mission, BC fence guide · new coverage

Fence rules and permits in Mission

Mission’s published zoning consolidation sets a conditional 1.9 m general fence cap within the Urban Growth Boundary and 1.2 m in a required front yard or street-flanking exterior side yard. Outside the UGB, wall-top fences, corner visibility and zone-specific provisions require separate review.

LOCAL FENCE HEIGHTConditional city limits documented

Check the lot’s Urban Growth Boundary status, yard, zone, grade and applicable exemptions with Mission before building.

What the municipal rules say (reviewed October 15, 2026)

Local evidence: City of Mission Zoning Bylaw 5949-2020, section 112.A.1: within the Urban Growth Boundary, fences are limited to 1.9 m generally or 1.2 m within required front yards or exterior side yards on a flanking street; a fence above a wall has a 1.5 m separate limit; urban front flanking fences need 33% visual permeability. These are conditional clauses, not a parcel-level authorization.

Check before building: Confirm the current consolidated section 112, parcel inside/outside the Urban Growth Boundary, particular zone, corner sightlines, grade, pools, wall and permit/variance conditions with Mission.

Official municipal sources: primary bylaw / permit portal; supporting document;

Indexing status: eligible as a city research guide in this staging build. This is not approval of any particular fence.

Municipal clause identified; parcel approval not verifiedNot a permit decision

What the current municipal source says

The City’s published Zoning Bylaw 5949-2020 contains section 112.A.1, including the conditional 1.9 m Urban Growth Boundary limit and a 1.2 m maximum in required front/exterior street-side yards. These figures do not apply to every property: verify the zoning, yard location, later amendments, wall and visibility conditions before building.

For the exact lot, check with City of Mission Planning whether the most recent amendments affect the property. This research guide is not a permit, variance or survey.

Can I build a fence in Mission?

Municipal fence, zoning and pool rules may overlap. Current municipal source material has been located; this summary does not certify the proposed fence or replace a property-specific municipal check.

Visit Mission municipal website ↗
Height and approval: CHECK YOUR PROPERTY CONTEXT. The local standards listed here may depend on yard definition, zone, permitted exemptions or sightline conditions.

Check the correct property situation

For Mission, first identify whether the proposed fence is in a front, rear, interior-side or street-side yard. Corner lots, driveway sightlines, sloped land, retaining walls and easements can change the measurement rule. Find your lot survey and municipal zoning category rather than relying on a neighbouring address.

Pool and boundary fencing

Pool barriers may have their own minimum enclosure requirements, gate rules and construction details. A fence on a shared boundary can also raise ownership and cost questions; the exact municipal bylaw and any applicable provincial dispute procedure are separate from the question of who owns the land.

What to ask Mission before installation

  • Which fence or zoning bylaw and section applies to this property and yard?
  • Is height measured from finished grade, natural grade, top of a retaining wall or another datum?
  • Is a permit required for an ordinary fence, a swimming-pool barrier or a retaining structure?
  • Does a corner sightline, drainage easement, heritage district or strata rule restrict placement?
  • Does the boundary need to be located by a surveyor before construction?

Official sources

Local section 112 evidence reviewed October 15, 2026. Municipal rules can change; verify parcel-specific exceptions and current zoning.