Home/Cities/Ontario/Richmond Hill
Richmond Hill, ON fence rules

Richmond Hill, ON fence rules

Richmond Hill’s guide uses 1.8 m for backyard and side-yard fences and 1.2 m in front yards, with special rules for corner properties and separate pool-enclosure requirements.

01 Front yard02 Side / rear03 Corner / driveway04 Pool / wall
Quick tool

Check Richmond Hill by fence location.

Numeric answers are limited to the municipalities with a clear researched height rule for the selected yard location.

Check fence height →
Before you build

Before you set the posts in Richmond Hill

Check the fence by where it sits on the lot, not only by its overall height. Front yards, interior side yards, street-facing side yards, rear yards and corner sight triangles can use different limits. A retaining wall below the fence can also change how the municipality measures the combined structure.

Confirm the legal property line before placing posts. Utility easements, rights-of-way and drainage routes can restrict a fence even when its height complies. If the fence encloses a pool or hot tub, use the municipality’s separate enclosure and gate rules rather than relying on the ordinary residential-fence result.

For an over-height fence, unusual material, corner lot or fence on top of a retaining wall, confirm whether a development, zoning, building or variance approval is required before buying materials. The official local source below controls if it differs from this guide.

Dedicated local sourcePage data snapshot updated September 20, 2026

October 2026 municipal source review

Town of Richmond Hill: front 1.2 m, rear/side 1.8 m; corner-lot rules and pools require separate consideration.

This describes published general rules, not automatic permission for any individual lot. Confirm corner/sightline geometry, pool fences, local zoning or approved variances.

Official municipality fence rules ↗

What the current Richmond Hill source says

Open the official Richmond Hill source ↗

Richmond Hill’s guide uses 1.8 m for backyard and side-yard fences and 1.2 m in front yards, with special rules for corner properties and separate pool-enclosure requirements.

Put the Richmond Hill rule against the actual property

If the project includes gates, a driveway or a pool, add those to the lot sketch before using the normal fence-height rule.

Do not use an old fence or hedge as the survey. If the property line is uncertain, establish it before treating the bylaw as the only issue.

A yard fence and a pool enclosure are not automatically the same legal object. Verify both rule sets where water is involved.

Verified decision details

  • Front yard: Maximum 1.2 m.
  • Side/rear: Maximum 1.8 m.
  • Corner/pool: Corner properties have specific provisions; pool projects must follow the pool-enclosure requirements.
  • Bylaw: Fence and Pool Enclosure By-law No. 140-90.

Official source reviewed September 28, 2026. No fixed municipal processing time was added unless the cited municipality published one.

Sources

Dedicated official sourceRichmond Hill — official fence/zoning source ↗

Page data snapshot updated September 20, 2026. Current municipal zoning and site-specific approvals control if they differ from this summary.