Regina’s deck, sunroom and fence guide separates zoning height from traffic visibility. A ground-oriented residential fence needs no building permit under the ordinary route, but the front-yard maximum is 1.22 m and the side/rear maximum is 2.14 m. The guide allows 2.44 m for a side or rear fence adjacent to an arterial or expressway street. This is an abutment condition, not a blanket eight-foot permission for every Regina yard. Check the actual street designation and lot line before applying the higher number.
The Regina Traffic Bylaw’s Schedule H1 restricts a fence in an intersection sightline triangle to 0.75 m. Schedule H2 covers setback from a travelled way. The guide explains that a fence generally needs to be at least 2 m from the curb if there is no sidewalk, or at least 0.6 m from a sidewalk. The apparent lawn edge can be within a public right-of-way, so survey information matters more than where the previous owner put the posts. On a corner lot or a lane exit, draw both street and lane edges on the site plan; a 1.22 m front fence may still be too high inside the 0.75 m sightline area.
Regina recommends confirming the boundary with a Saskatchewan land surveyor and contacting utilities before excavation. A common real-world complaint is a tall solid side fence built to the sidewalk at a corner: zoning may allow a rear section at 2.14 m, but Traffic Bylaw visibility and public-edge setbacks require the street end to move or step down. An owner who wants a tall noise screen beside an arterial should document the street class and any retaining-wall grade on a cross-section. For a pool or another regulated structure, obtain its separate requirements before assuming an ordinary no-permit fence protects the site. The City's diagram and zoning source remain the route for address-specific review.
Last verified: September 28, 2026. This Regina guide summarizes the linked municipal sources for planning; the property’s zoning, survey and any required approval decide the actual design. How we research fence rules →
